(571) 760-4255Mon–Fri: 8 AM–11 PM, Sat–Sun: 7 AM–11 PM
J&K Alexandria Concrete Company
A blue swimming pool sits on a light concrete deck beneath a black-framed screened enclosure, with patio chairs and a beige umbrella.

Concrete cutting in Alexandria VA - clean cuts that leave the rest of the slab whole

One cracked panel, a new drain line or a wall that needs a door? We cut just that part and leave the rest solid.

Request an estimate(571) 760-4255

Tell us what needs cutting and where

Call (571) 760-4255 or use the form with the surface, the length of cut or number of holes, and whether you want removal, so I show up with the right questions.

Request an estimate

When does concrete need to be cut instead of torn out?

Concrete cutting in Alexandria means sawing straight lines through a slab, cutting openings in walls, or core drilling round holes for pipes, drains and conduit, so you can remove or get through only the part you need.

Usually it's one cracked driveway panel, a new drain line that has to run under the floor or a wall that needs a door, and the rest of the concrete is fine. What moves the price is how much you're cutting, how thick the concrete is, how much steel is in it and whether you want the pieces hauled off. The schedule mostly turns on whether the slab needs scanning first and what permits the job needs. Your written estimate spells out what's included, and we work from Alexandria across the cities around it in Northern Virginia and nearby Maryland.

Request an estimate

Why Alexandria homeowners call J&K Alexandria Concrete Company to cut concrete

  • I price every cut in person

    I come out to look at the job myself and write the estimate, and our own crew does the work. The person asking what's in your slab is the one planning the cut.

  • Licensed and fully insured

    We're licensed and fully insured, and on cutting jobs that matters because a blade works close to pipes, wires and the house itself. Ask any cutter you're comparing to show you both.

  • Northern Virginia trained, since 2017

    I framed houses, then learned concrete on crews around Northern Virginia before starting this business in 2017. We're known for jobs with a twist, like an old slab that has to be cut open.

On a cutting job, what matters most is what's buried in the concrete, because you can't put it back once the blade is through. Send us the details and I'll come take a look.

How we handle concrete cutting

Before we price a cut, we settle whether you want the pieces hauled off or left in place and whether the slab should be scanned first, so the quote covers the job you actually want. Scanning matters most on structural or post-tensioned concrete, a slab with steel cables pulled tight inside it, because a scan finds rebar, the steel bars that reinforce concrete, along with those cables, conduit and pipes before the blade does. Then we mark the lines, and if the job includes breaking out and digging, Virginia law requires a locate request before any excavation or demolition starts, which is free through Virginia 811 and gets the utilities out to mark their lines. Our crew cuts with the saw that fits the concrete, breaks out and hauls off the pieces if that's in the estimate, and cleans up so the opening is ready for what comes next.

Most cuts are the first half of another job. When a cracked or sunken section comes out of a driveway, concrete driveway building is the second half, with the base dug out and packed before the new pour. A trench for a drain or a cut-back edge often turns into concrete patio construction, where we check which way the water runs before anything gets poured.

  • Cut only, pieces left in place

    Suits you when another trade is breaking it out later or you'd rather handle removal yourself. We cut clean lines and leave the panels where they sit.

  • Cut, break out and haul away

    Suits a cracked driveway panel or a section of patio coming out for good. You end up with a clean-edged opening and no rubble pile in the yard.

  • Core drilled holes

    Suits a new drain, vent or conduit that has to pass through a slab or wall. A core drill cuts a neat round hole, and it's priced separately from saw cuts.

How do you know a slab needs cutting, not tearing out?

  • One bad driveway panel

    One section is cracked or sunk while the rest of the driveway is fine. A clean cut lets that piece come out alone, and waiting usually lets water get under its neighbors too.

  • A pipe needs through

    A new drain, dryer vent or conduit has to pass through a slab or foundation wall. Punching it through with a hammer usually cracks far more than you meant to open.

  • Plumbing under the floor

    A leak or a new bathroom means a trench through a basement or garage floor. Putting off a leak lets water wash out what the slab sits on, and that's a bigger repair.

  • A wall needs an opening

    You want a doorway or a bigger window in a concrete wall. It needs a square, planned cut, and until it's scanned and priced, the rest of the project can't really get scheduled.

What happens after you call about concrete cutting in Alexandria?

  1. Call and I come look

    You call, and I come look at the slab or wall and ask what's in it and what you need cut. You get a written estimate spelling out what's included.

  2. We plan the paperwork, then cut

    We sort out which office covers your address and what paperwork the job needs before setting a date. Then our crew cuts and hauls off the pieces if that's included.

  3. Walk the finished job together

    When the cutting and cleanup are done, I walk the job with you so you can see the edges and openings before we call it finished.

Concrete cutting questions we hear

These are the questions people ask before they hire someone to cut concrete in Alexandria. If your job has a twist these don't cover, call and ask about it.

Request an estimate
How much does concrete cutting cost per foot in Alexandria, VA?

Across the US, concrete saw cutting in slabs and walls usually costs about $4 to $25 per linear foot, and that covers the sawing, not breaking out or hauling the pieces. Reinforced or deeper concrete costs more per foot than an ordinary 4- to 6-inch slab, and on a small job a minimum or mobilization charge, the cost of getting the saw to your house, can set the price more than the per-foot rate. Your estimate lists what's included, such as removal and haul-away, so you can compare it fairly with other bids.

Is removal included when you hire someone to cut concrete?

Not always, because sawing concrete and removing it are separate jobs, and some cutters only cut the lines and leave the panels in place. Breaking, lifting, hauling and disposal can cost more than the sawing itself, so ask every contractor whether removal is in their number.

What is the best saw for cutting a concrete floor slab or a wall?

A flat saw, which rolls along the floor, is the usual tool for slabs, and a wall saw, which runs on a track on the wall, cuts openings in walls. Hand saws reach tight spots a bigger saw can't, and wire saws handle very thick or heavily reinforced sections.

How do I check a concrete contractor's license in Virginia?

Look the business up with Virginia's Board for Contractors, which licenses businesses that build, remove, repair or improve things on property owned by others. Each license has a class that sets how big a job it allows and a specialty that sets the type of work. Class C covers single jobs over $1,000 and under $30,000, Class B covers $30,000 or more but under $150,000, and Class A covers $150,000 and up.

Do I need a permit to cut concrete in Alexandria, VA?

It may need one, so check with the City of Alexandria's permit office before work starts. The city requires permits for most construction work on buildings and structures, and its list names alterations, demolitions, renovations and additions rather than concrete cutting on its own, so a cut that's part of one of those projects is worth asking about. We sort out which office covers your address before we set a date.

Who issues permits for work on the sidewalk or street in Alexandria?

The city's Transportation & Environmental Services issues permits for any work in or use of the public right-of-way, meaning the street, the sidewalk and the strip between them. That includes a dumpster or trailer on the street or sidewalk, closing the sidewalk or a lane, and piling materials there, which can come up when a cut reaches the edge of your property.

Get a written estimate for your cut

Tell us the surface, the length of cut or number of holes, and whether you want removal included, and we'll reply within one business day. I come out for a free estimate at your property, with no obligation.

(571) 760-4255